Frequent NPI
Every new board restarts programming and debug work.
For high-mix, low-volume PCBA production
Stop spending hours programming AOI for every new board.
P1 turns one reference board into a working inspection program in minutes—without a conveyor, component library, or mandatory CAD files.
- One reference board
- CAD optional
- Runs on your hardware
P1
OFFLINE · 2D · AI-NATIVE
OFFLINE · 2D · AI-NATIVETHE HIGH-MIX PROBLEM
When the run is short, setup time becomes the real cost.
Thin engineering coverage
Specialists become the bottleneck for every changeover.
False-call rework
Operators keep reviewing the same acceptable variation.
WHY OFFLINE P1
Program and inspect without holding the SMT line.
P1 is built for irregular job flow, short runs, labs, NPI and production inspection where flexibility matters more than conveyor integration.
Traditional AOIDaoAI P1
Programming inputCAD + library + manual regionsOne reference board; CAD optional
Changeover workflowEngineer-led tuningAI auto-programming, operator-ready
LearningThresholds adjusted repeatedlyFeedback improves the local model
DeploymentLine integration requiredOffline, manual load, auto-clamp
P1 AT A GLANCE
The practical 2D AOI for changing production.
P1Camera5 MP
Resolution15 µm per pixel
Board range50 × 50 mm – 470 × 330 mm
Inspection16 named 2D inspection items
MarkingAI OCR and OCV
HandlingOffline, manual load, auto-clamp
P1 fits when…
- Your product mix changes every week
- Runs are too short to justify hours of setup
- CAD or library data arrives late—or not at all
- You need NPI inspection away from the production line
LIVE P1 WORKFLOW
Bring the board that gives your current AOI trouble.
In a live session, an engineer will show the P1 workflow on a real board and answer where offline 2D AOI does—and does not—fit your process.