ComparisonsOctober 7, 2026

Mek AOI Alternative: DaoAI vs Mek (Marantz Electronics) Compared

DaoAI vs Mek (Marantz Electronics) AOI: golden-board vs EZPro AI-assisted programming, inline and desktop 3D, through-hole, and how to test both.

Reference-based editorial illustration of DaoAI P3 and P1 inspection machines on a navy background.

Direct answer. DaoAI is an alternative to Mek (Marantz Electronics) AOI for SMT and through-hole lines. The main difference is what a new program starts from. Every DaoAI SMT AOI programs itself from one golden board in 30 seconds to 5 minutes. There is no component library to build or maintain, and no XY data is required. Mek says ISO-Spector M2 programs "can be prepared offline from CAD and Gerber data or updated instantly once production begins," with AI-assisted programming through its EZPro software. DaoAI's inline 3D P5 and P5D are available now, the A3 checks through-hole components before the wave, the A5 and A6 inspect the solder joints after it, and all AI runs on the machine.

At a glance: DaoAI vs Mek

TopicDaoAI (per daoai.com)Mek / Marantz Electronics (per published materials)
CompanyDaoAI Robotics Inc., Vancouver, Canada. 1,000+ systems in the field.Mek, also known as Marantz Electronics. Regional companies: Mek Europe BV (Tilburg, Netherlands) and Mek Americas LLC (Las Vegas, USA).
Programming inputsOne golden board. No component library to build or maintain, and no XY data required."Programs can be prepared offline from CAD and Gerber data or updated instantly once production begins" (ISO-Spector M2).
AI in programmingGolden-board auto-programming on every SMT model."AI-assisted programming through EZPro" (ISO-Spector M2).
Stated programming time30 seconds to 5 minutes per new board.No per-board figure in the materials reviewed.
Inline 3DP5 and P5D (dual-track), available now.ISO-Spector M2: multi-angle 3D imaging, Moiré fringe projection and telecentric optics.
Desktop / offlineOffline 2D: P1, P1L, P2.PowerSpector JSAz550 3D desktop AOI, boards up to 550 × 550 mm.
Inline 2DP3, P3D.Not stated in the materials reviewed.
Through-holeA3 before wave (component checks); A5 and A6 after wave (solder joints).SpectorBOX X1: 3D inspection for through-hole assemblies.
Other—VeriSpector assembly-station inspection; PowerSpector SP1 solder paste inspection.
Where AI and data runAll AI runs on the machine; inspection data never leaves your factory.Not stated in the materials reviewed; confirm with Mek.

Mek information from mek-europe.com and trade-press releases (2024–2026), checked October 5, 2026.

How does programming compare?

Mek's 2026 description of the ISO-Spector M2 gives two routes: programs "can be prepared offline from CAD and Gerber data or updated instantly once production begins." It adds that, using AI-assisted programming through EZPro, the M2 "can detect defects from hundreds of parameters while giving operators full control to refine inspection criteria." Offline preparation from CAD and Gerber lets an engineer build a program before boards reach the line, provided that data is available and current.

DaoAI starts from the physical board. The machine builds the full inspection program from one golden board in 30 seconds to 5 minutes. There is no component library to build or maintain, and no XY data is required, so a new board can be inspected as soon as the first good one is built. XY and BOM data are optional, never required. See the golden-board AOI programming guide and the auto-programming feature page.

A fair test question for both vendors: how long from a brand-new board, with only the board in hand, to a released program?

What does each lineup cover?

Mek describes modular, inline and desktop systems and is known for its iSpector and PowerSpector platforms. Recent products include the ISO-Spector M2 3D AOI, the SpectorBOX X1 for 3D inspection of through-hole assemblies, the VeriSpector for assembly-station inspection of SMT boards, the PowerSpector JSAz550 3D desktop AOI for boards up to 550 × 550 mm, and the PowerSpector SP1 for solder paste inspection.

DaoAI offers offline 2D (P1, P1L, P2), inline 2D (P3, P3D), inline 3D (P5, P5D, available now) and through-hole (A3 before wave; A5 and A6 after wave), all on one software platform; the SMT models, the A5 and the A6 use golden-board programming and the A3 is set up from one known-good board. For a high-mix plant, that means the offline P1L on an NPI bench and an inline P5D on a production line are programmed the same way. See AOI for NPI and prototype lines.

Where does the AI run, and who supports you?

All AI on a DaoAI machine runs on the machine, and inspection data never leaves your factory. See on-premise AI AOI and data security.

The Mek materials reviewed do not state where EZPro's AI processing or image storage happens. Ask Mek directly.

DaoAI provides sales and engineering support from its North American team in Vancouver, plus authorized partners. Mek lists Mek Americas LLC in Las Vegas for the Americas.

What drives total cost of ownership?

Over the life of an AOI, these costs usually outweigh the purchase price, whether you choose DaoAI or Mek:

To put numbers on each line, use our AOI ROI and payback guide.

How to evaluate DaoAI against Mek on your own boards

  1. Board-only programming. Hand each system the same new board with no XY data and time it to a released program.
  2. Programming with data. Repeat with XY data available, and record any differences.
  3. Detection. Use boards with known defects, such as solder balls, component shift and lifted leads, and count escapes.
  4. False-call review time. Log operator minutes per board over several hundred boards, before and after tuning.
  5. Through-hole. Compare the same THT board before and after wave.
  6. Data handling. Confirm where images and models are stored.

FAQ

Does Mek AOI need CAD data?

Mek says ISO-Spector M2 programs can be prepared offline from CAD and Gerber data or updated once production begins, with AI-assisted programming through EZPro. Whether CAD is required for every new board is not stated in the materials reviewed; confirm with Mek.

Does DaoAI need XY data or a component library?

No. Every DaoAI SMT AOI programs itself from one golden board in 30 seconds to 5 minutes. There is no component library to build or maintain, and no XY data is required.

Does DaoAI have inline 3D AOI?

Yes. The P5 and P5D inline 3D AOI machines are available now.

Can DaoAI inspect through-hole boards before and after wave?

Yes, with two machines: the DaoAI A3 checks through-hole components before wave solder, and the A5 or A6 inspects the solder joints after it.

Can I test DaoAI on my own boards?

Yes. Send us one of your own SMT boards and we'll test it free of charge.

Sources

Competitor information checked October 5, 2026. Confirm current details with the vendor.

Every DaoAI SMT AOI programs itself from one golden board in 30 seconds to 5 minutes, with no component library to build or maintain and no XY data required. The P5 and P5D inline 3D AOI are available now. Send us one of your own SMT boards and we'll test it free of charge.

Related

Subscribe for an instantly better inbox

AI inspection insights, product news, and industry analysis. Once a month, no noise.

We use your details to reply to your enquiry. See our Privacy Policy.